| Pièce | Qté | Unitaire | Valeur | Ventes/mois |
|---|---|---|---|---|
| Slope 14 4 x 1 | 29 | 1,12 € | 32,51 € | 2 |
| Slope, Curved 2 x 1 x 1 2/3 | 22 | 1,02 € | 22,35 € | 1 |
| Slope, Curved 2 x 2 x 2/3 Corner Round | 10 | 1,52 € | 15,24 € | 0 |
| Slope, Curved 3 x 2 | 28 | 0,25 € | 6,90 € | 14 |
| Slope, Curved 2 x 2 x 2/3 Corner Round | 8 | 0,79 € | 6,30 € | 0 |
| Plate 6 x 14 | 2 | 2,46 € | 4,93 € | 22 |
| Plate, Modified 2 x 2 x 2/3 with 2 Studs on Side - Hollow Bottom Tube | 13 | 0,35 € | 4,52 € | 1 |
| Slope, Curved 1 x 1 | 4 | 1,06 € | 4,26 € | 2 |
| Brick, Modified 1 x 2 x 1 2/3 with Studs on Sides | 7 | 0,60 € | 4,19 € | 5 |
| Slope, Curved 2 x 1 x 1 2/3 | 8 | 0,43 € | 3,43 € | 0 |
| Wedge 3 x 2 Left No Studs | 4 | 0,82 € | 3,28 € | 0 |
| Wedge, Plate 8 x 3 Left | 10 | 0,31 € | 3,08 € | 1 |
| Slope, Curved 4 x 1 x 1 2/3 | 8 | 0,38 € | 3,00 € | 0 |
| Slope, Curved 3 x 1 x 2/3 | 2 | 1,49 € | 2,97 € | 2 |
| Slope 18 2 x 1 x 2/3 | 7 | 0,42 € | 2,93 € | 2 |
| Plate, Modified 2 x 2 x 2/3 with 2 Studs on Side - Hollow Bottom Tube | 23 | 0,13 € | 2,90 € | 2 |
| Brick, Modified 1 x 1 x 1 2/3 with Studs on 3 Sides | 5 | 0,57 € | 2,86 € | 1 |
| Brick, Modified 1 x 1 x 1 2/3 with Studs on 3 Sides | 4 | 0,71 € | 2,82 € | 1 |
| Brick, Round 1 x 1 x 2/3 Half Circle Extended with Stud on Side | 10 | 0,27 € | 2,69 € | 109 |
| Technic, Axle and Pin Connector Angled #7 - 168.75 degrees | 4 | 0,67 € | 2,69 € | 3 |
| Bracket 5 x 1 x 1 1/3 | 1 | 2,61 € | 2,61 € | 0 |
| Bracket 1 x 2 - 2 x 2 Inverted | 4 | 0,64 € | 2,55 € | 0 |
| Technic, Brick 1 x 16 with Holes | 5 | 0,50 € | 2,52 € | 399 |
| Brick, Round 1 x 1 x 2/3 Half Circle Extended with Stud on Side | 12 | 0,21 € | 2,51 € | 5 |
| Brick, Modified 1 x 2 x 1 2/3 with Studs on Side | 12 | 0,20 € | 2,38 € | 112 |
| Plate 2 x 4 | 9 | 0,26 € | 2,31 € | 37 |
| Wedge 2 x 1 x 2/3 Left | 10 | 0,23 € | 2,28 € | 26 |
| Slope, Curved 3 x 3 Corner Round | 10 | 0,21 € | 2,14 € | 4 |
| Technic, Brick 1 x 1 with Axle Hole | 18 | 0,12 € | 2,12 € | 20 |
| Wedge 2 x 1 x 2/3 Right | 10 | 0,21 € | 2,11 € | 26 |
| Brick, Modified 1 x 2 x 1 2/3 with Studs on Side | 4 | 0,52 € | 2,10 € | 0 |
| Plate, Round Corner 2 x 2 with 1 x 1 Cutout | 4 | 0,52 € | 2,09 € | 4 |
| Brick, Modified 1 x 1 with Studs on 2 Sides, Opposite | 7 | 0,29 € | 2,03 € | 28 |
| Brick, Round 1 x 1 x 2/3 Half Circle Extended with Stud on Side | 6 | 0,33 € | 2,00 € | 8 |
| Tile, Modified 1 x 2 Wedge Left | 6 | 0,33 € | 2,00 € | 5 |
| Slope 14 4 x 1 | 32 | 0,06 € | 1,97 € | 0 |
| Technic, Brick Modified 2 x 2 with Ball Joint and Axle Hole with 6 Holes in Ball | 2 | 0,98 € | 1,95 € | 2 |
| Bracket 1 x 1 - 1 x 1 | 10 | 0,19 € | 1,94 € | 18 |
| Wedge, Plate 8 x 3 Right | 6 | 0,32 € | 1,92 € | 0 |
| Slope, Curved 2 x 2 x 2/3 Corner Round | 4 | 0,46 € | 1,82 € | 7 |
| Tile, Modified 1 x 2 Wedge Right | 6 | 0,30 € | 1,82 € | 7 |
| Tile 2 x 6 | 7 | 0,25 € | 1,76 € | 192 |
| Minifigure, Utensil Ring 1 x 1 | 4 | 0,44 € | 1,74 € | 150 |
| Slope, Curved 3 x 1 | 8 | 0,21 € | 1,70 € | 38 |
| Tile, Round 1 x 1 with Bar and Small Pin Hole | 2 | 0,81 € | 1,62 € | 5 |
| Plate 1 x 1 | 65 | 0,02 € | 1,60 € | 517 |
| Large Figure Weapon, Blade Crystal Shard with Axle | 4 | 0,39 € | 1,55 € | 4 |
| Brick, Round Corner 4 x 4 without Studs | 4 | 0,39 € | 1,55 € | 0 |
| Plate 1 x 5 | 4 | 0,38 € | 1,51 € | 4 |
| Plate 1 x 2 | 18 | 0,08 € | 1,51 € | 54 |
| Plate 3 x 3 Corner | 2 | 0,73 € | 1,46 € | 1 |
| Plate, Round Corner 4 x 4 | 6 | 0,24 € | 1,45 € | 4 |
| Brick, Modified 1 x 2 x 1 2/3 with Studs on Side | 4 | 0,33 € | 1,32 € | 9 |
| Slope, Curved 1 x 1 | 4 | 0,32 € | 1,30 € | 0 |
| Tile 2 x 3 | 6 | 0,21 € | 1,27 € | 58 |
| Cone 2 x 2 x 2 Inverted | 2 | 0,61 € | 1,21 € | 0 |
| Bracket 1 x 1 - 1 x 2 | 3 | 0,40 € | 1,20 € | 2 |
| Tile 2 x 3 | 8 | 0,14 € | 1,14 € | 402 |
| Slope 45 1 x 1 x 2/3 Double | 7 | 0,16 € | 1,13 € | 3 |
| Brick, Modified 1 x 2 x 1 2/3 with Studs on Side and Ends | 6 | 0,19 € | 1,11 € | 86 |
| Bracket 1 x 2 - 2 x 2 Inverted | 4 | 0,28 € | 1,11 € | 3 |
| Slope, Curved 1 x 1 | 4 | 0,28 € | 1,11 € | 4 |
| Brick, Modified 1 x 1 x 2/3 with Open Stud | 10 | 0,11 € | 1,09 € | 22 |
| Plate, Round 1 x 1 with Open Stud | 7 | 0,15 € | 1,07 € | 38 |
| Tile, Modified 2 x 2 Wedge Triangular | 4 | 0,27 € | 1,06 € | 17 |
| Wave Angular Single with Axle Hole End (Lightning Bolt) | 5 | 0,21 € | 1,05 € | 6 |
| Plate 2 x 3 | 10 | 0,10 € | 1,05 € | 44 |
| Plate 3 x 3 Corner | 10 | 0,10 € | 1,03 € | 18 |
| Plate 1 x 3 | 14 | 0,07 € | 1,00 € | 2037 |
| Technic, Brick 1 x 3 with Holes | 1 | 0,99 € | 0,99 € | 1 |
| Plate, Round 1 x 3 with Open Studs | 2 | 0,49 € | 0,98 € | 1 |
| Plate 1 x 3 | 21 | 0,05 € | 0,96 € | 602 |
| Tile 2 x 4 | 9 | 0,11 € | 0,96 € | 268 |
| Brick, Round 1 x 2 with Hollow Studs and Open Center with Bars | 4 | 0,24 € | 0,95 € | 13 |
| Plate 1 x 2 | 44 | 0,02 € | 0,95 € | 1028 |
| Tile, Modified 2 x 2 with Studs on Edge | 13 | 0,07 € | 0,95 € | 64 |
| Technic, Brick 1 x 12 with Holes | 3 | 0,30 € | 0,91 € | 62 |
| Tile 2 x 4 | 5 | 0,18 € | 0,91 € | 1030 |
| Plate, Modified 1 x 2 with Clip on End (Vertical Grip) | 5 | 0,18 € | 0,89 € | 3 |
| Plate, Round 1 x 3 with Open Studs | 1 | 0,87 € | 0,87 € | 2 |
| Brick, Modified 1 x 1 x 2/3 with Open Stud | 9 | 0,10 € | 0,87 € | 72 |
| Slope, Curved 2 x 2 x 2/3 Inverted | 6 | 0,14 € | 0,87 € | 9 |
| Slope, Curved 2 x 2 x 2/3 | 13 | 0,07 € | 0,86 € | 223 |
| Wedge 2 x 2 x 2/3 Left | 1 | 0,85 € | 0,85 € | 1 |
| Plate, Modified 2 x 2 x 2/3 with 2 Studs on Side - Hollow Bottom Tube | 7 | 0,12 € | 0,85 € | 7 |
| Technic, Liftarm Thin 1 x 2 - Axle Holes | 4 | 0,21 € | 0,84 € | 4 |
| Brick, Modified 1 x 1 x 1 2/3 with Studs on Side | 8 | 0,10 € | 0,82 € | 56 |
| Plate 4 x 4 | 10 | 0,08 € | 0,81 € | 883 |
| Plate 2 x 2 | 35 | 0,02 € | 0,80 € | 646 |
| Slope, Curved 2 x 1 x 2/3 Inverted | 6 | 0,13 € | 0,78 € | 88 |
| Plate 2 x 3 | 11 | 0,07 € | 0,77 € | 56 |
| Plate, Modified 2 x 2 x 2/3 with 2 Studs on Side - Hollow Bottom Tube | 16 | 0,05 € | 0,76 € | 46 |
| Plate 2 x 2 Corner | 20 | 0,04 € | 0,75 € | 110 |
| Slope, Curved 1 x 1 x 2/3 Double | 4 | 0,19 € | 0,75 € | 4 |
| Plate 1 x 2 | 39 | 0,02 € | 0,74 € | 180 |
| Brick, Modified 1 x 1 with Studs on 2 Sides, Opposite | 4 | 0,18 € | 0,70 € | 75 |
| Brick, Modified 1 x 4 with Studs on Side | 17 | 0,04 € | 0,70 € | 207 |
| Slope, Curved 1 x 2 x 2/3 Double | 2 | 0,34 € | 0,68 € | 3 |
| Bracket 1 x 1 - 1 x 2 Inverted | 5 | 0,14 € | 0,68 € | 28 |
| Plate 1 x 4 | 16 | 0,04 € | 0,67 € | 2737 |
| Bracket 1 x 2 - 1 x 2 Inverted | 6 | 0,11 € | 0,65 € | 28 |
| Technic, Brick 4 x 6 Open Center | 2 | 0,32 € | 0,64 € | 212 |
| Tile 1 x 3 | 8 | 0,08 € | 0,63 € | 314 |
| Brick, Modified 1 x 1 x 1 2/3 with Studs on Side | 4 | 0,16 € | 0,63 € | 12 |
| Plate 6 x 10 | 2 | 0,31 € | 0,61 € | 78 |
| Bracket 1 x 1 - 1 x 1 Inverted | 5 | 0,12 € | 0,61 € | 39 |
| Brick, Modified 1 x 2 with Studs on 1 Side | 4 | 0,15 € | 0,59 € | 14 |
| Brick, Modified 1 x 1 x 2/3 with Open Stud | 2 | 0,30 € | 0,59 € | 0 |
| Tile 2 x 2 | 6 | 0,10 € | 0,59 € | 1307 |
| Wedge 2 x 2 x 2/3 Right | 1 | 0,58 € | 0,58 € | 2 |
| Tile, Round Corner 4 x 4 Macaroni | 4 | 0,15 € | 0,58 € | 52 |
| Technic, Axle Connector 2 x 3 with Ball Joint Socket - Closed Sides, Straight Forks with Closed Axle Holes | 1 | 0,58 € | 0,58 € | 2 |
| Plate, Modified 2 x 3 with 1 x 1 Cutout | 2 | 0,29 € | 0,57 € | 6 |
| Bracket 1 x 1 - 1 x 2 | 2 | 0,28 € | 0,57 € | 36 |
| Plate 3 x 3 | 4 | 0,14 € | 0,56 € | 260 |
| Brick, Modified 1 x 2 x 1 2/3 with Studs on Side | 6 | 0,09 € | 0,56 € | 271 |
| Technic, Axle 2L Notched | 14 | 0,04 € | 0,54 € | 1163 |
| Plate 1 x 4 | 16 | 0,03 € | 0,53 € | 123 |
| Brick, Round 1 x 1 | 4 | 0,13 € | 0,53 € | 6 |
| Technic, Brick 1 x 14 with Holes | 2 | 0,26 € | 0,53 € | 198 |
| Wedge, Plate 2 x 2 Right | 3 | 0,17 € | 0,52 € | 57 |
| Technic Bush | 3 | 0,17 € | 0,51 € | 128 |
| Wedge, Plate 2 x 2 Left | 3 | 0,17 € | 0,51 € | 56 |
| Tile, Modified 2 x 2 with Studs on Edge | 2 | 0,26 € | 0,51 € | 3 |
| Brick, Modified 1 x 2 with Studs on 2 Sides | 4 | 0,13 € | 0,51 € | 8 |
| Technic, Axle and Pin Connector Hub with 1L Axle | 2 | 0,25 € | 0,49 € | 2 |
| Plate, Modified 2 x 2 x 2/3 with 2 Studs on Side - Hollow Bottom Tube | 2 | 0,24 € | 0,48 € | 3 |
| Brick, Modified 1 x 2 with Studs on 1 Side | 7 | 0,07 € | 0,47 € | 75 |
| Slope 45 2 x 1 with Cutout without Stud | 4 | 0,12 € | 0,47 € | 38 |
| Technic, Pin 3L with Friction Ridges | 22 | 0,02 € | 0,46 € | 1291 |
| Technic, Pin with Short Friction Ridges | 37 | 0,01 € | 0,46 € | 2390 |
| Plate 1 x 2 | 11 | 0,04 € | 0,45 € | 3298 |
| Plate 2 x 16 | 2 | 0,23 € | 0,45 € | 660 |
| Plate 2 x 4 | 13 | 0,03 € | 0,45 € | 107 |
| Plate 1 x 8 | 7 | 0,06 € | 0,45 € | 380 |
| Plate 1 x 1 | 9 | 0,05 € | 0,45 € | 1775 |
| Tile, Round Corner 4 x 4 Macaroni | 4 | 0,11 € | 0,44 € | 97 |
| Plate 2 x 2 Corner | 11 | 0,04 € | 0,44 € | 396 |
| Brick, Modified 1 x 1 x 1 2/3 with Studs on Side | 4 | 0,11 € | 0,44 € | 24 |
| Wedge 2 x 1 x 2/3 Left | 4 | 0,11 € | 0,44 € | 331 |
| Bracket 1 x 2 - 1 x 2 | 6 | 0,07 € | 0,43 € | 87 |
| Plate, Round Corner 2 x 2 with 1 x 1 Cutout | 4 | 0,11 € | 0,42 € | 12 |
| Arch 1 x 2 Inverted | 4 | 0,10 € | 0,42 € | 1 |
| Wedge 2 x 1 x 2/3 Right | 4 | 0,10 € | 0,42 € | 356 |
| Brick, Modified 1 x 2 x 1 2/3 with Studs on Side and Ends | 4 | 0,10 € | 0,42 € | 85 |
| Bar 1L with 1 x 1 Round Plate with Hollow Stud | 3 | 0,14 € | 0,41 € | 21 |
| Tile 1 x 8 | 3 | 0,13 € | 0,40 € | 1075 |
| Plate, Modified 1 x 3 with 2 Studs (Double Jumper) | 5 | 0,08 € | 0,40 € | 328 |
| Plate 1 x 3 | 6 | 0,07 € | 0,40 € | 129 |
| Brick, Modified 1 x 1 with Headlight | 4 | 0,10 € | 0,39 € | 93 |
| Brick, Modified 1 x 1 with Studs on 2 Sides, Adjacent | 4 | 0,10 € | 0,38 € | 28 |
| Slope, Curved 4 x 2 | 4 | 0,09 € | 0,38 € | 47 |
| Plate 2 x 3 | 9 | 0,04 € | 0,38 € | 2179 |
| Brick, Modified 1 x 1 with Stud on Side | 2 | 0,19 € | 0,37 € | 3 |
| Plate 1 x 5 | 2 | 0,19 € | 0,37 € | 63 |
| Slope, Curved 2 x 1 x 2/3 | 8 | 0,05 € | 0,37 € | 284 |
| Plate 1 x 6 | 7 | 0,05 € | 0,36 € | 2108 |
| Plate, Round 1 x 1 with Open Stud | 11 | 0,03 € | 0,36 € | 30 |
| Slope 18 2 x 1 x 2/3 | 1 | 0,35 € | 0,35 € | 10 |
| Plate 1 x 2 | 11 | 0,03 € | 0,35 € | 220 |
| Tile 2 x 6 | 1 | 0,35 € | 0,35 € | 22 |
| Plate 1 x 4 | 13 | 0,03 € | 0,34 € | 734 |
| Wedge, Plate 6 x 3 Right | 1 | 0,34 € | 0,34 € | 26 |
| Wedge, Plate 6 x 3 Left | 1 | 0,33 € | 0,33 € | 28 |
| Slope, Curved 2 x 2 x 2/3 | 4 | 0,08 € | 0,33 € | 720 |
| Slope, Curved 4 x 1 | 6 | 0,06 € | 0,33 € | 130 |
| Technic, Brick 1 x 1 with Axle Hole | 4 | 0,08 € | 0,33 € | 18 |
| Plate 1 x 5 | 2 | 0,16 € | 0,33 € | 150 |
| Technic, Brick Modified 2 x 2 with Ball Socket and Axle Hole - Straight Forks with Round Ends and Closed Sides | 2 | 0,16 € | 0,32 € | 40 |
| Plate 2 x 2 | 2 | 0,16 € | 0,32 € | 23 |
| Slope 30 1 x 2 x 2/3 | 11 | 0,03 € | 0,32 € | 268 |
| Brick 2 x 8 | 2 | 0,16 € | 0,32 € | 183 |
| Plate 4 x 4 | 4 | 0,08 € | 0,31 € | 1136 |
| Brick 2 x 2 | 6 | 0,05 € | 0,31 € | 5 |
| Plate, Round 2 x 2 with Axle Hole | 2 | 0,15 € | 0,30 € | 3 |
| Tile 1 x 4 | 4 | 0,08 € | 0,30 € | 1830 |
| Brick 1 x 8 | 2 | 0,15 € | 0,30 € | 246 |
| Brick, Modified 1 x 1 x 1 2/3 with Studs on Side | 4 | 0,08 € | 0,30 € | 5 |
| Plate 2 x 2 | 10 | 0,03 € | 0,30 € | 66 |
| Tile 1 x 1 | 9 | 0,03 € | 0,30 € | 434 |
| Bracket 1 x 2 - 1 x 2 Inverted | 6 | 0,05 € | 0,30 € | 139 |
| Technic, Brick 1 x 10 with Holes | 2 | 0,15 € | 0,30 € | 117 |
| Plate 3 x 3 Corner | 2 | 0,15 € | 0,30 € | 28 |
| Tile 1 x 4 | 6 | 0,05 € | 0,29 € | 545 |
| Slope, Curved 3 x 1 | 6 | 0,05 € | 0,29 € | 155 |
| Plate 1 x 1 | 13 | 0,02 € | 0,29 € | 82 |
| Plate 2 x 4 | 7 | 0,04 € | 0,29 € | 2610 |
| Plate 2 x 8 | 3 | 0,09 € | 0,28 € | 6 |
| Plate 2 x 3 | 10 | 0,03 € | 0,28 € | 481 |
| Plate, Round 1 x 3 with Open Studs | 4 | 0,07 € | 0,27 € | 0 |
| Plate 2 x 8 | 2 | 0,14 € | 0,27 € | 26 |
| Brick, Round Corner 3 x 3 x 2 Dome Top | 2 | 0,14 € | 0,27 € | 9 |
| Hinge Cylinder 1 x 2 Locking with 2 Fingers and Axle Hole on Ends without Slots | 2 | 0,13 € | 0,27 € | 1 |
| Bracket 1 x 1 - 1 x 2 Inverted | 2 | 0,13 € | 0,26 € | 250 |
| Plate 2 x 2 Corner | 2 | 0,13 € | 0,26 € | 29 |
| Tile 2 x 6 | 1 | 0,26 € | 0,26 € | 2 |
| Wedge, Plate 3 x 2 Right | 1 | 0,26 € | 0,26 € | 66 |
| Brick, Modified 1 x 1 x 1 2/3 with Studs on Side | 2 | 0,13 € | 0,25 € | 210 |
| Bracket 1 x 1 - 1 x 2 | 2 | 0,13 € | 0,25 € | 8 |
| Wedge, Plate 3 x 2 Left | 1 | 0,25 € | 0,25 € | 62 |
| Brick 2 x 4 | 4 | 0,06 € | 0,25 € | 150 |
| Plate 4 x 4 | 4 | 0,06 € | 0,24 € | 249 |
| Slope 30 1 x 1 x 2/3 | 13 | 0,02 € | 0,24 € | 346 |
| Bar 2L with Stop Ring | 3 | 0,08 € | 0,24 € | 23 |
| Bracket 1 x 1 - 1 x 2 Inverted | 2 | 0,12 € | 0,24 € | 42 |
| Plate 2 x 8 | 3 | 0,08 € | 0,24 € | 1538 |
| Plate 6 x 6 | 1 | 0,24 € | 0,24 € | 312 |
| Plate 2 x 2 Corner | 6 | 0,04 € | 0,24 € | 1628 |
| Plate 1 x 3 | 2 | 0,12 € | 0,24 € | 139 |
| Brick 1 x 4 | 7 | 0,03 € | 0,23 € | 84 |
| Wedge, Plate 4 x 2 Left | 7 | 0,03 € | 0,23 € | 466 |
| Brick, Modified 1 x 4 with Studs on Side | 3 | 0,08 € | 0,23 € | 436 |
| Plate 1 x 4 | 10 | 0,02 € | 0,23 € | 74 |
| Technic, Brick 1 x 12 with Holes | 1 | 0,23 € | 0,23 € | 90 |
| Brick, Modified 1 x 1 with Stud on Side | 2 | 0,12 € | 0,23 € | 921 |
| Plate 2 x 6 | 6 | 0,04 € | 0,23 € | 417 |
| Tile 1 x 6 | 4 | 0,06 € | 0,23 € | 345 |
| Plate 4 x 6 | 2 | 0,11 € | 0,23 € | 1154 |
| Plate, Modified 4 x 4 with 2 x 2 Open Center | 4 | 0,06 € | 0,23 € | 140 |
| Bracket 1 x 2 - 2 x 2 Inverted | 3 | 0,07 € | 0,22 € | 70 |
| Plate 1 x 1 | 6 | 0,04 € | 0,22 € | 723 |
| Brick 1 x 2 | 7 | 0,03 € | 0,22 € | 124 |
| Brick, Modified 1 x 1 x 2/3 with Open Stud | 2 | 0,11 € | 0,22 € | 87 |
| Tile, Modified 2 x 2 Wedge Triangular | 4 | 0,05 € | 0,21 € | 191 |
| Brick 1 x 1 | 8 | 0,03 € | 0,21 € | 109 |
| Tile 1 x 8 | 2 | 0,10 € | 0,21 € | 300 |
| Wedge, Plate 3 x 2 Right | 4 | 0,05 € | 0,21 € | 134 |
| Plate 2 x 6 | 6 | 0,03 € | 0,21 € | 184 |
| Brick 1 x 2 | 10 | 0,02 € | 0,21 € | 655 |
| Slope, Curved 1 x 2 with Bottom Stud Holder | 2 | 0,10 € | 0,20 € | 20 |
| Plate 2 x 4 | 5 | 0,04 € | 0,20 € | 45 |
| Wedge, Plate 3 x 2 Left | 4 | 0,05 € | 0,20 € | 134 |
| Plate 4 x 6 | 3 | 0,07 € | 0,20 € | 100 |
| Slope 30 1 x 2 x 2/3 | 5 | 0,04 € | 0,19 € | 1218 |
| Technic, Brick 1 x 8 with Holes | 2 | 0,10 € | 0,19 € | 555 |
| Technic, Axle and Pin Connector Hub with 2 Perpendicular Axles | 3 | 0,06 € | 0,19 € | 135 |
| Tile 2 x 2 | 4 | 0,05 € | 0,19 € | 422 |
| Plate 2 x 4 | 6 | 0,03 € | 0,19 € | 632 |
| Bracket 1 x 1 - 1 x 1 Inverted | 2 | 0,09 € | 0,19 € | 569 |
| Plate 2 x 6 | 5 | 0,04 € | 0,18 € | 44 |
| Plate 4 x 8 | 1 | 0,18 € | 0,18 € | 850 |
| Brick 1 x 10 | 1 | 0,18 € | 0,18 € | 332 |
| Plate 1 x 1 | 6 | 0,03 € | 0,18 € | 156 |
| Technic, Axle and Pin Connector Angled #5 - 112.5 degrees | 2 | 0,09 € | 0,18 € | 28 |
| Brick, Modified 1 x 2 x 1 2/3 with Studs on Side | 2 | 0,09 € | 0,18 € | 11 |
| Wedge, Plate 4 x 2 Left | 5 | 0,04 € | 0,18 € | 133 |
| Wedge, Plate 4 x 2 Right | 5 | 0,04 € | 0,18 € | 123 |
| Technic, Axle 4L | 6 | 0,03 € | 0,18 € | 154 |
| Plate 1 x 3 | 3 | 0,06 € | 0,17 € | 82 |
| Bracket 1 x 2 - 2 x 2 | 7 | 0,02 € | 0,17 € | 85 |
| Plate 2 x 2 | 6 | 0,03 € | 0,17 € | 1378 |
| Technic, Pin Connector Round 2L with Slot (Pin Joiner Round) | 2 | 0,08 € | 0,17 € | 342 |
| Technic, Brick 1 x 2 with Holes | 4 | 0,04 € | 0,17 € | 686 |
| Technic, Brick 1 x 4 with Holes | 3 | 0,06 € | 0,17 € | 260 |
| Plate 4 x 4 | 2 | 0,08 € | 0,17 € | 48 |
| Technic, Axle and Pin Connector Angled #5 - 112.5 degrees | 4 | 0,04 € | 0,17 € | 284 |
| Bracket 1 x 2 - 1 x 2 | 2 | 0,08 € | 0,16 € | 91 |
| Brick 2 x 2 Corner | 2 | 0,08 € | 0,16 € | 22 |
| Wedge, Plate 4 x 2 Right | 5 | 0,03 € | 0,16 € | 463 |
| Brick 1 x 8 | 2 | 0,08 € | 0,16 € | 226 |
| Plate 1 x 6 | 3 | 0,05 € | 0,16 € | 1430 |
| Technic, Axle 1L with Pin with Friction Ridges | 12 | 0,01 € | 0,16 € | 1509 |
| Technic, Liftarm Thin 1 x 3 - Axle Holes | 2 | 0,08 € | 0,16 € | 60 |
| Slope 18 4 x 1 | 3 | 0,05 € | 0,16 € | 70 |
| Bracket 1 x 1 - 1 x 1 | 1 | 0,15 € | 0,15 € | 279 |
| Plate 4 x 4 | 2 | 0,08 € | 0,15 € | 329 |
| Plate 1 x 6 | 3 | 0,05 € | 0,15 € | 1473 |
| Brick 1 x 1 | 8 | 0,02 € | 0,15 € | 227 |
| Technic, Brick 1 x 6 with Holes | 2 | 0,08 € | 0,15 € | 360 |
| Technic, Liftarm Thick 1 x 7 | 2 | 0,08 € | 0,15 € | 526 |
| Plate 2 x 4 | 5 | 0,03 € | 0,15 € | 120 |
| Tile, Round 1 x 1 | 5 | 0,03 € | 0,15 € | 143 |
| Plate 1 x 4 | 6 | 0,02 € | 0,15 € | 308 |
| Plate 1 x 10 | 1 | 0,15 € | 0,15 € | 11 |
| Brick, Modified 1 x 2 with Studs on 2 Sides | 2 | 0,07 € | 0,15 € | 68 |
| Plate 4 x 8 | 1 | 0,14 € | 0,14 € | 214 |
| Slope, Curved 3 x 2 | 1 | 0,14 € | 0,14 € | 133 |
| Plate, Round Corner 2 x 6 Double | 2 | 0,07 € | 0,14 € | 32 |
| Technic, Brick 1 x 1 with Hole | 3 | 0,05 € | 0,14 € | 874 |
| Plate 1 x 6 | 4 | 0,04 € | 0,14 € | 527 |
| Technic, Axle and Pin Connector Angled #3 - 157.5 degrees | 2 | 0,07 € | 0,14 € | 350 |
| Plate 1 x 2 | 4 | 0,03 € | 0,14 € | 2429 |
| Plate, Round 1 x 1 with Open Stud | 3 | 0,05 € | 0,14 € | 11 |
| Brick, Modified 1 x 2 x 1 2/3 with Studs on Side and Ends | 2 | 0,07 € | 0,14 € | 0 |
| Plate, Round Corner 2 x 2 | 2 | 0,07 € | 0,14 € | 0 |
| Brick, Modified 1 x 2 with Log Profile | 4 | 0,03 € | 0,14 € | 407 |
| Brick 2 x 3 | 2 | 0,07 € | 0,13 € | 814 |
| Brick, Modified 1 x 1 with Stud on Side | 4 | 0,03 € | 0,13 € | 223 |
| Tile 1 x 2 | 2 | 0,06 € | 0,13 € | 2031 |
| Plate, Round Corner 2 x 6 Double | 2 | 0,06 € | 0,13 € | 80 |
| Plate, Modified 1 x 2 with Clip on End (Vertical Grip) | 1 | 0,12 € | 0,12 € | 0 |
| Brick 1 x 2 x 2 with Inside Stud Holder | 2 | 0,06 € | 0,12 € | 236 |
| Plate 4 x 8 | 1 | 0,12 € | 0,12 € | 235 |
| Tile 2 x 2 | 2 | 0,06 € | 0,12 € | 34 |
| Plate 2 x 12 | 1 | 0,12 € | 0,12 € | 863 |
| Plate 1 x 4 | 2 | 0,06 € | 0,12 € | 131 |
| Bar Holder with Clip | 2 | 0,06 € | 0,12 € | 246 |
| Brick 2 x 4 | 2 | 0,06 € | 0,11 € | 251 |
| Plate, Round Corner 2 x 6 Double | 1 | 0,11 € | 0,11 € | 3 |
| Brick 2 x 4 | 2 | 0,06 € | 0,11 € | 248 |
| Technic, Brick 1 x 2 with Holes | 3 | 0,04 € | 0,11 € | 274 |
| Brick 1 x 4 | 3 | 0,04 € | 0,11 € | 61 |
| Technic, Brick 1 x 1 with Hole | 4 | 0,03 € | 0,11 € | 203 |
| Tile 1 x 1 | 2 | 0,05 € | 0,11 € | 1297 |
| Technic, Brick 1 x 2 with Axle Hole | 4 | 0,03 € | 0,11 € | 639 |
| Tile 1 x 6 | 1 | 0,11 € | 0,11 € | 1380 |
| Technic, Liftarm Thick 1 x 2 | 1 | 0,11 € | 0,11 € | 345 |
| Plate 1 x 1 | 3 | 0,03 € | 0,10 € | 1601 |
| Plate, Modified 2 x 6 x 2/3 with 4 Studs on Side | 2 | 0,05 € | 0,10 € | 3 |
| Brick 2 x 2 | 1 | 0,10 € | 0,10 € | 51 |
| Brick 1 x 6 | 2 | 0,05 € | 0,10 € | 77 |
| Technic, Liftarm, Modified Bent Thick 1 x 9 (7 - 3) | 2 | 0,05 € | 0,10 € | 167 |
| Slope 33 3 x 1 | 2 | 0,05 € | 0,10 € | 104 |
| Brick 1 x 2 | 4 | 0,03 € | 0,10 € | 91 |
| Wedge, Plate 2 x 2 Left | 1 | 0,10 € | 0,10 € | 292 |
| Technic, Axle Connector 2L (Smooth with x Hole + Orientation) | 3 | 0,03 € | 0,10 € | 669 |
| Technic, Brick 1 x 2 with Axle Hole | 4 | 0,02 € | 0,10 € | 332 |
| Plate 4 x 4 | 1 | 0,10 € | 0,10 € | 610 |
| Plate 2 x 4 | 3 | 0,03 € | 0,10 € | 876 |
| Brick 2 x 4 | 1 | 0,10 € | 0,10 € | 116 |
| Technic, Brick 1 x 2 with Hole | 2 | 0,05 € | 0,10 € | 32 |
| Plate 1 x 10 | 1 | 0,10 € | 0,10 € | 216 |
| Brick 1 x 3 | 3 | 0,03 € | 0,09 € | 363 |
| Plate 1 x 2 | 4 | 0,02 € | 0,09 € | 1452 |
| Brick, Modified 1 x 2 with Studs on 1 Side | 2 | 0,05 € | 0,09 € | 506 |
| Tile, Round 1 x 1 Quarter | 3 | 0,03 € | 0,09 € | 89 |
| Bar 3L (Bar Arrow) | 2 | 0,04 € | 0,09 € | 414 |
| Plate, Modified 4 x 4 with 2 x 2 Open Center | 2 | 0,04 € | 0,09 € | 46 |
| Plate 2 x 2 | 2 | 0,04 € | 0,09 € | 396 |
| Technic, Brick 1 x 1 with Axle Hole | 2 | 0,04 € | 0,09 € | 7 |
| Tile, Modified 1 x 2 Grille with Bottom Groove | 4 | 0,02 € | 0,08 € | 306 |
| Plate 1 x 3 | 2 | 0,04 € | 0,08 € | 674 |
| Technic, Liftarm, Modified Bent Thick L-Shape 3 x 5 | 2 | 0,04 € | 0,08 € | 61 |
| Plate 2 x 10 | 1 | 0,08 € | 0,08 € | 377 |
| Wedge, Plate 4 x 4 Cut Corner | 2 | 0,04 € | 0,08 € | 78 |
| Tile 1 x 2 | 2 | 0,04 € | 0,08 € | 723 |
| Plate 1 x 8 | 1 | 0,08 € | 0,08 € | 439 |
| Plate 1 x 8 | 1 | 0,08 € | 0,08 € | 1040 |
| Plate 2 x 2 | 2 | 0,04 € | 0,08 € | 220 |
| Slope, Curved 2 x 1 x 2/3 | 2 | 0,04 € | 0,08 € | 419 |
| Brick 1 x 4 | 1 | 0,07 € | 0,07 € | 8 |
| Brick 1 x 1 | 2 | 0,04 € | 0,07 € | 160 |
| Technic, Axle Connector with Axle Hole | 2 | 0,04 € | 0,07 € | 614 |
| Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper) | 2 | 0,04 € | 0,07 € | 1040 |
| Technic, Brick Modified 2 x 2 with Pin Hole and Rotation Joint Ball Half Vertical | 2 | 0,04 € | 0,07 € | 79 |
| Brick and Axle Separator | 1 | 0,07 € | 0,07 € | 146 |
| Brick 1 x 3 | 1 | 0,07 € | 0,07 € | 795 |
| Slope, Inverted 33 3 x 1 | 2 | 0,04 € | 0,07 € | 99 |
| Hinge Plate 1 x 2 Locking with 1 Finger on End without Bottom Groove | 2 | 0,03 € | 0,07 € | 27 |
| Slope, Curved 4 x 1 Inverted | 2 | 0,03 € | 0,07 € | 220 |
| Technic, Axle and Pin Connector Angled #1 | 2 | 0,03 € | 0,07 € | 183 |
| Technic, Brick 1 x 6 with Holes | 1 | 0,07 € | 0,07 € | 609 |
| Tile 1 x 3 | 1 | 0,07 € | 0,07 € | 66 |
| Tile 2 x 2 | 1 | 0,06 € | 0,06 € | 949 |
| Plate 2 x 2 | 2 | 0,03 € | 0,06 € | 2488 |
| Plate 1 x 2 | 2 | 0,03 € | 0,06 € | 1276 |
| Brick, Modified 1 x 2 with Log Profile | 2 | 0,03 € | 0,06 € | 287 |
| Brick, Modified 1 x 2 with Log Profile | 2 | 0,03 € | 0,06 € | 107 |
| Brick 1 x 1 | 3 | 0,02 € | 0,06 € | 476 |
| Brick, Modified 1 x 2 with Log Profile | 2 | 0,03 € | 0,06 € | 161 |
| Technic, Axle 2L with Pin with Friction Ridges | 2 | 0,03 € | 0,06 € | 541 |
| Slope, Curved 2 x 2 x 2/3 | 1 | 0,06 € | 0,06 € | 336 |
| Technic Rotation Joint Ball Loop with 2 Perpendicular Pins with Friction | 2 | 0,03 € | 0,06 € | 15 |
| Slope, Inverted 33 3 x 2 with Flat Bottom Pin and Connections between Studs | 2 | 0,03 € | 0,06 € | 66 |
| Technic, Axle 2L Notched | 4 | 0,01 € | 0,06 € | 1216 |
| Tap 1 x 1 without Hole in Nozzle End | 3 | 0,02 € | 0,06 € | 309 |
| Technic, Axle 5L with Stop | 2 | 0,03 € | 0,06 € | 245 |
| Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper) | 2 | 0,03 € | 0,06 € | 243 |
| Slope, Inverted 33 3 x 2 with Flat Bottom Pin and Connections between Studs | 2 | 0,03 € | 0,06 € | 57 |
| Tile 2 x 2 | 1 | 0,05 € | 0,05 € | 128 |
| Hinge Cylinder 1 x 2 Locking with 2 Fingers and Axle Hole on Ends without Slots | 1 | 0,05 € | 0,05 € | 60 |
| Brick, Round 1 x 1 | 2 | 0,03 € | 0,05 € | 47 |
| Plate 2 x 4 | 2 | 0,03 € | 0,05 € | 232 |
| Technic, Liftarm Thick 1 x 3 | 1 | 0,05 € | 0,05 € | 578 |
| Plate 1 x 6 | 1 | 0,05 € | 0,05 € | 658 |
| Technic Bush 1/2 Smooth | 3 | 0,02 € | 0,05 € | 427 |
| Plate 2 x 2 | 2 | 0,03 € | 0,05 € | 1004 |
| Plate, Round 1 x 2 with Open Studs | 1 | 0,05 € | 0,05 € | 185 |
| Wedge, Plate 3 x 2 Right | 1 | 0,05 € | 0,05 € | 474 |
| Wedge, Plate 3 x 2 Left | 1 | 0,05 € | 0,05 € | 479 |
| Technic, Liftarm Thick 1 x 5 | 1 | 0,05 € | 0,05 € | 545 |
| Plate, Round 1 x 1 | 3 | 0,01 € | 0,04 € | 155 |
| Technic, Axle 3L | 2 | 0,02 € | 0,04 € | 166 |
| Brick 2 x 2 | 1 | 0,04 € | 0,04 € | 1126 |
| Technic, Axle 4L with Stop | 2 | 0,02 € | 0,04 € | 795 |
| Technic, Plate 1 x 5 with Smooth Ends, 4 Studs and Center Axle Hole | 1 | 0,04 € | 0,04 € | 91 |
| Plate 2 x 6 | 1 | 0,04 € | 0,04 € | 576 |
| Technic, Axle 4L | 2 | 0,02 € | 0,04 € | 1407 |
| Plate 2 x 6 | 1 | 0,04 € | 0,04 € | 478 |
| Slope 30 1 x 1 x 2/3 | 2 | 0,02 € | 0,04 € | 1313 |
| Brick 1 x 4 | 1 | 0,04 € | 0,04 € | 485 |
| Brick 2 x 3 | 1 | 0,04 € | 0,04 € | 80 |
| Brick, Modified 2 x 2 with Pins and Axle Hole | 1 | 0,03 € | 0,03 € | 6 |
| Plate 1 x 4 | 1 | 0,03 € | 0,03 € | 1005 |
| Brick 1 x 2 | 1 | 0,03 € | 0,03 € | 90 |
| Hinge Plate 1 x 2 Locking with 1 Finger on Top | 1 | 0,02 € | 0,02 € | 276 |
| Bracket 1 x 2 - 1 x 4 with Rounded Corners at the Bottom | 1 | 0,02 € | 0,02 € | 158 |
| Brick 1 x 1 | 1 | 0,02 € | 0,02 € | 70 |
| Brick 1 x 1 | 1 | 0,02 € | 0,02 € | 235 |
| Slope 45 2 x 2 | 1 | 0,02 € | 0,02 € | 31 |
| Plate 3 x 3 | 2 | 0,01 € | 0,02 € | 0 |
| Pièce | Qté | Unitaire | Valeur | Ventes/mois |
|---|---|---|---|---|
| Plate, Round 1 x 1 with Clip on Bottom | 19 | 0,42 € | 7,97 € | 2 |
| Barb / Claw / Horn / Tooth with Clip, Angled | 30 | 0,17 € | 5,20 € | 0 |
| Plate 2 x 4 | 4 | 0,43 € | 1,71 € | 0 |
| Tile 1 x 2 | 4 | 0,41 € | 1,62 € | 1 |
| Slope, Curved 2 x 1 with Recessed Stud | 4 | 0,27 € | 1,08 € | 1 |
| Brick, Round Tube 1 x 1 d. 90 degrees Elbow Macaroni - No Stud - Type 2 - Axle Hole | 2 | 0,53 € | 1,06 € | 0 |
| Brick, Round 2 x 2 with Axle Hole | 2 | 0,52 € | 1,04 € | 1 |
| Plate 1 x 2 | 8 | 0,10 € | 0,81 € | 19 |
| Brick, Modified 1 x 2 with Studs on 1 Side | 4 | 0,19 € | 0,75 € | 37 |
| Minifigure, Headgear Crown Eggshell with 5 Points and Center Stud | 3 | 0,15 € | 0,44 € | 5 |
| Plate 1 x 4 | 3 | 0,14 € | 0,41 € | 9 |
| Tile 2 x 4 | 3 | 0,14 € | 0,41 € | 19 |
| Tile 1 x 4 | 1 | 0,35 € | 0,35 € | 1 |
| Brick, Round 2 x 2 with Axle Hole | 2 | 0,17 € | 0,35 € | 0 |
| Bar 1L with Angled Hollow Stud | 4 | 0,08 € | 0,32 € | 60 |
| Plant Flower Stem with Bar and 3 Stems Short | 3 | 0,10 € | 0,31 € | 28 |
| Technic, Axle Connector Hub with 3 Axles | 1 | 0,25 € | 0,25 € | 5 |
| Plate 1 x 1 | 3 | 0,07 € | 0,21 € | 13 |
| Plate 2 x 2 | 6 | 0,03 € | 0,20 € | 97 |
| Plate 4 x 6 | 2 | 0,09 € | 0,18 € | 382 |
| Plate, Round 1 x 1 with Open Stud | 4 | 0,04 € | 0,15 € | 92 |
| Plate 4 x 4 | 2 | 0,07 € | 0,15 € | 388 |
| Brick, Modified 1 x 4 with Studs on Side | 2 | 0,07 € | 0,14 € | 646 |
| Plant Flower Stem with Bar Holder, Bar, and 3 Stems | 4 | 0,03 € | 0,14 € | 206 |
| Plate, Round 1 x 1 with Flower Edge (5 Petals) | 7 | 0,02 € | 0,14 € | 82 |
| Bracket 1 x 2 - 1 x 2 Inverted | 2 | 0,06 € | 0,11 € | 210 |
| Brick, Modified 1 x 1 with Stud on Side | 4 | 0,03 € | 0,11 € | 85 |
| Cone 1 x 1 with Top Groove | 4 | 0,03 € | 0,10 € | 146 |
| Plate 1 x 2 | 4 | 0,03 € | 0,10 € | 189 |
| Plate, Modified 2 x 2 x 2/3 with 2 Studs on Side - Hollow Bottom Tube | 3 | 0,03 € | 0,10 € | 73 |
| Plate, Round 2 x 2 with Axle Hole | 4 | 0,02 € | 0,10 € | 922 |
| Plate 1 x 2 | 3 | 0,03 € | 0,09 € | 1276 |
| Plate, Round 2 x 2 with Axle Hole | 3 | 0,03 € | 0,09 € | 169 |
| Plate, Round 2 x 2 with Rounded Bottom (Boat Stud) | 2 | 0,05 € | 0,09 € | 2 |
| Tile 1 x 4 | 2 | 0,05 € | 0,09 € | 80 |
| Plate, Round 1 x 1 with Flower Edge (5 Petals) | 4 | 0,02 € | 0,09 € | 242 |
| Tile, Round 2 x 2 with Bottom Stud Holder | 2 | 0,04 € | 0,09 € | 20 |
| Brick 1 x 2 x 2 with Inside Stud Holder | 2 | 0,04 € | 0,09 € | 88 |
| Plate 2 x 2 | 3 | 0,03 € | 0,09 € | 1378 |
| Brick, Round 2 x 2 with Axle Hole | 2 | 0,04 € | 0,09 € | 525 |
| Plate, Round 1 x 1 with Open Stud | 3 | 0,03 € | 0,09 € | 298 |
| Tile, Modified 1 x 2 with Bar Handle | 4 | 0,02 € | 0,08 € | 192 |
| Technic, Axle 1L with Pin with Friction Ridges | 6 | 0,01 € | 0,08 € | 1509 |
| Brick 2 x 2 | 2 | 0,04 € | 0,07 € | 493 |
| Plate, Round 1 x 1 with Star and Small Pin Hole | 4 | 0,02 € | 0,07 € | 45 |
| Plate 1 x 2 | 2 | 0,03 € | 0,07 € | 2429 |
| Tile, Round 2 x 2 with Open Stud | 1 | 0,07 € | 0,07 € | 20 |
| Plate, Round 2 x 2 with Axle Hole | 2 | 0,03 € | 0,06 € | 333 |
| Plate 2 x 2 | 2 | 0,03 € | 0,05 € | 796 |
| Tile, Round 2 x 2 with Bottom Stud Holder | 2 | 0,03 € | 0,05 € | 25 |
| Brick 1 x 2 | 2 | 0,02 € | 0,05 € | 57 |
| Plate, Round 1 x 1 with Flower Edge (5 Petals) | 2 | 0,02 € | 0,04 € | 57 |
| Plate 2 x 6 | 1 | 0,04 € | 0,04 € | 59 |
| Technic, Axle 3L | 1 | 0,02 € | 0,02 € | 1162 |
| Pièce | Qté | Unitaire | Valeur | Ventes/mois |
|---|---|---|---|---|
| Container, Barrel 2 x 2 x 2 | 6 | 8,45 € | 50,72 € | 0 |
| Tile, Round 6 x 6 | 4 | 2,00 € | 8,00 € | 0 |
| Brick 1 x 16 | 14 | 0,32 € | 4,50 € | 341 |
| Slope 10 6 x 1 | 6 | 0,74 € | 4,43 € | 4 |
| Brick 1 x 2 x 5 | 17 | 0,22 € | 3,76 € | 146 |
| Brick 1 x 4 | 57 | 0,06 € | 3,56 € | 63 |
| Plate 16 x 16 | 1 | 3,33 € | 3,33 € | 20 |
| Brick 1 x 6 | 25 | 0,13 € | 3,16 € | 25 |
| Brick, Modified 1 x 2 with Studs on 1 Side | 15 | 0,21 € | 3,15 € | 2 |
| Arch 1 x 3 x 2 with Flat End | 2 | 1,50 € | 3,00 € | 1 |
| Plate 4 x 12 | 8 | 0,37 € | 3,00 € | 277 |
| Brick 1 x 1 | 44 | 0,06 € | 2,73 € | 50 |
| Slope 18 2 x 1 x 2/3 | 4 | 0,64 € | 2,57 € | 2 |
| Technic, Brick 1 x 3 with Holes | 5 | 0,48 € | 2,39 € | 2 |
| Technic, Brick 5 x 5 Right Angle (1 x 4 - 1 x 4) | 6 | 0,36 € | 2,17 € | 153 |
| Brick 1 x 4 x 3 | 6 | 0,36 € | 2,13 € | 7 |
| Brick 2 x 2 | 10 | 0,21 € | 2,09 € | 2 |
| Brick 1 x 3 | 22 | 0,09 € | 1,96 € | 1015 |
| Plate 4 x 10 | 9 | 0,21 € | 1,89 € | 600 |
| Slope, Curved 2 x 1 x 1 2/3 | 4 | 0,47 € | 1,87 € | 0 |
| Minifigure, Head (Plain) | 6 | 0,30 € | 1,81 € | 501 |
| Brick 1 x 8 | 9 | 0,18 € | 1,61 € | 678 |
| Technic, Axle 16L | 1 | 1,57 € | 1,57 € | 55 |
| Technic, Liftarm, Modified Frame Thick 3 x 19 Open Center | 1 | 1,56 € | 1,56 € | 2 |
| Technic, Liftarm Thin 1 x 6 | 8 | 0,19 € | 1,48 € | 196 |
| Brick 1 x 4 without Bottom Tubes | 1 | 1,47 € | 1,47 € | 2 |
| Brick, Round Corner 2 x 2 x 1 2/3 Dome Top | 4 | 0,36 € | 1,46 € | 0 |
| Brick 1 x 3 | 32 | 0,04 € | 1,40 € | 43 |
| Tile 2 x 3 | 9 | 0,14 € | 1,28 € | 402 |
| Plate 1 x 3 | 17 | 0,07 € | 1,21 € | 2037 |
| Tile 1 x 6 | 18 | 0,06 € | 1,14 € | 408 |
| Arch 1 x 3 x 2 Inverted | 3 | 0,37 € | 1,12 € | 8 |
| Arch 1 x 3 x 2 Inverted | 4 | 0,27 € | 1,08 € | 8 |
| Tile 1 x 8 | 8 | 0,13 € | 1,07 € | 1075 |
| Technic, Liftarm, Modified Frame Thick 3 x 13 Open Center | 1 | 1,02 € | 1,02 € | 5 |
| Tile 2 x 6 | 4 | 0,25 € | 1,01 € | 36 |
| Brick, Modified 1 x 2 with Stud on Side with Bottom Stud Holder | 4 | 0,25 € | 0,99 € | 11 |
| Brick, Round 4 x 4 Dome Top with 2 x 2 Recessed Center | 1 | 0,98 € | 0,98 € | 1 |
| Brick 2 x 8 | 4 | 0,25 € | 0,98 € | 371 |
| Brick 1 x 10 | 4 | 0,24 € | 0,97 € | 302 |
| Tile 1 x 6 | 9 | 0,11 € | 0,96 € | 1380 |
| Tile 4 x 4 | 2 | 0,47 € | 0,95 € | 8 |
| Slope, Curved 2 x 1 with Recessed Stud | 4 | 0,24 € | 0,94 € | 2 |
| Technic, Liftarm Thick 1 x 13 | 5 | 0,18 € | 0,89 € | 345 |
| Tile 2 x 4 | 6 | 0,14 € | 0,85 € | 42 |
| Brick, Round 4 x 4 with 4 Side Pin Holes and Center Axle Hole | 1 | 0,84 € | 0,84 € | 145 |
| Tile 1 x 6 | 16 | 0,05 € | 0,83 € | 91 |
| Technic, Liftarm Thick 1 x 15 | 3 | 0,27 € | 0,82 € | 82 |
| Technic, Liftarm Thick 1 x 1 (Spacer) | 4 | 0,20 € | 0,81 € | 3 |
| Brick 1 x 6 | 10 | 0,08 € | 0,81 € | 971 |
| Brick 1 x 6 | 6 | 0,13 € | 0,80 € | 985 |
| Technic, Liftarm Thick 1 x 1 (Spacer) | 6 | 0,13 € | 0,80 € | 10 |
| Plate 1 x 2 | 19 | 0,04 € | 0,78 € | 3298 |
| Brick 2 x 6 | 4 | 0,19 € | 0,76 € | 0 |
| Plate 1 x 5 | 4 | 0,19 € | 0,74 € | 63 |
| Technic, Link 1 x 16 | 1 | 0,73 € | 0,73 € | 1 |
| Technic, Brick 1 x 1 with Axle Hole | 10 | 0,07 € | 0,71 € | 28 |
| Brick 1 x 16 | 3 | 0,22 € | 0,67 € | 274 |
| Bar 4L (Lightsaber Blade / Wand) | 12 | 0,06 € | 0,66 € | 980 |
| Slope, Curved 1 x 2 x 2/3 Double | 1 | 0,66 € | 0,66 € | 2 |
| Brick 1 x 4 | 8 | 0,08 € | 0,66 € | 1417 |
| Bracket 1 x 2 - 2 x 1 Centered | 3 | 0,21 € | 0,64 € | 2 |
| Brick, Round Corner 4 x 4 Macaroni with 3 Studs | 8 | 0,08 € | 0,64 € | 10 |
| Plate, Round Corner 5 x 5 Macaroni | 4 | 0,16 € | 0,63 € | 2 |
| Brick 2 x 10 | 2 | 0,31 € | 0,62 € | 205 |
| Plate 6 x 10 | 2 | 0,30 € | 0,61 € | 424 |
| Tile 1 x 8 | 2 | 0,30 € | 0,60 € | 2 |
| Technic, Pin 3L with Friction Ridges | 28 | 0,02 € | 0,59 € | 1291 |
| Brick 1 x 12 | 4 | 0,15 € | 0,58 € | 98 |
| Slope, Inverted 45 2 x 2 with Hollow Round Bottom Tube | 10 | 0,06 € | 0,57 € | 63 |
| Brick, Modified 1 x 1 with Stud on Side | 13 | 0,04 € | 0,55 € | 387 |
| Plate 1 x 8 | 6 | 0,09 € | 0,54 € | 35 |
| Slope, Curved 1 x 1 | 1 | 0,53 € | 0,53 € | 2 |
| Slope, Curved 10 x 1 | 6 | 0,09 € | 0,52 € | 207 |
| Tile 1 x 2 | 8 | 0,06 € | 0,51 € | 2031 |
| Brick, Modified 1 x 1 with Studs on 2 Sides, Adjacent | 2 | 0,23 € | 0,46 € | 7 |
| Slope, Curved 1 x 2 with Bottom Stud Holder | 3 | 0,15 € | 0,46 € | 42 |
| Plate, Modified 2 x 2 with Pin on Bottom | 1 | 0,46 € | 0,46 € | 28 |
| Plate 2 x 16 | 2 | 0,23 € | 0,45 € | 660 |
| Plate 2 x 4 | 11 | 0,04 € | 0,45 € | 2610 |
| Technic, Panel Plate 3 x 11 x 1 | 1 | 0,44 € | 0,44 € | 66 |
| Brick, Modified 1 x 1 x 2/3 with Open Stud | 4 | 0,11 € | 0,43 € | 87 |
| Tile 1 x 2 | 12 | 0,04 € | 0,43 € | 956 |
| Tile 2 x 3 | 2 | 0,21 € | 0,42 € | 58 |
| Plate, Round 1 x 2 with Open Studs | 8 | 0,05 € | 0,42 € | 161 |
| Plate 1 x 4 | 10 | 0,04 € | 0,42 € | 2737 |
| Plate 1 x 2 | 18 | 0,02 € | 0,42 € | 1452 |
| Brick 1 x 3 | 12 | 0,03 € | 0,41 € | 457 |
| Bracket 1 x 2 - 2 x 4 Inverted | 1 | 0,41 € | 0,41 € | 0 |
| Brick, Modified 1 x 4 with Studs on Side | 7 | 0,06 € | 0,40 € | 588 |
| Slope 65 2 x 1 x 2 | 4 | 0,10 € | 0,39 € | 8 |
| Plate 2 x 14 | 2 | 0,19 € | 0,39 € | 292 |
| Panel 1 x 4 x 2 with Side Supports - Hollow Studs | 7 | 0,06 € | 0,39 € | 56 |
| Bracket 1 x 2 - 1 x 2 Inverted | 2 | 0,19 € | 0,39 € | 45 |
| Technic, Axle and Pin Connector Angled #1 | 12 | 0,03 € | 0,37 € | 673 |
| Plate 1 x 6 | 10 | 0,04 € | 0,37 € | 770 |
| Tile, Round Corner 3 x 3 Macaroni | 2 | 0,18 € | 0,37 € | 1 |
| Plate, Round Corner 6 x 6 | 2 | 0,18 € | 0,36 € | 16 |
| Plate, Round Corner 4 x 4 | 4 | 0,09 € | 0,36 € | 142 |
| Plate 4 x 12 | 1 | 0,35 € | 0,35 € | 463 |
| Plate, Round 1 x 2 with Open Studs | 7 | 0,05 € | 0,35 € | 277 |
| Arch 1 x 6 x 2 - Medium Thick Top without Reinforced Underside | 2 | 0,17 € | 0,34 € | 14 |
| Plate 1 x 4 | 11 | 0,03 € | 0,32 € | 1044 |
| Technic, Brick 4 x 6 Open Center | 1 | 0,32 € | 0,32 € | 212 |
| Plate 2 x 8 | 4 | 0,08 € | 0,32 € | 1538 |
| Tile 1 x 3 | 2 | 0,16 € | 0,32 € | 5 |
| Plate, Round 4 x 4 x 2/3 with Star and Open Stud | 2 | 0,15 € | 0,31 € | 16 |
| Plate 1 x 6 | 6 | 0,05 € | 0,31 € | 2108 |
| Technic, Liftarm Thick 1 x 7 | 5 | 0,06 € | 0,31 € | 124 |
| Plate, Modified 2 x 3 with Hole | 3 | 0,10 € | 0,30 € | 136 |
| Brick 1 x 2 without Bottom Tube | 5 | 0,06 € | 0,30 € | 442 |
| Plate, Modified 1 x 2 with Clip on End (Vertical Grip) | 2 | 0,15 € | 0,30 € | 8 |
| Tile, Round 3 x 3 | 1 | 0,30 € | 0,30 € | 7 |
| Plate 3 x 3 Corner | 2 | 0,15 € | 0,30 € | 28 |
| Technic, Liftarm Thick 1 x 9 | 3 | 0,10 € | 0,29 € | 103 |
| Tile, Round Corner 4 x 4 Macaroni | 2 | 0,15 € | 0,29 € | 52 |
| Technic, Pin 1/2 with Friction Ridges | 9 | 0,03 € | 0,29 € | 150 |
| Arch 1 x 2 Inverted | 2 | 0,14 € | 0,28 € | 8 |
| Plate 3 x 3 | 2 | 0,14 € | 0,28 € | 260 |
| Bracket 5 x 1 x 1 1/3 | 2 | 0,14 € | 0,28 € | 2 |
| Tile 1 x 4 | 4 | 0,07 € | 0,28 € | 80 |
| Plate 1 x 4 | 8 | 0,03 € | 0,27 € | 166 |
| Technic, Liftarm, Modified L-Shape Quarter Ellipse Thin 3 x 5 | 4 | 0,07 € | 0,27 € | 133 |
| Plate 4 x 6 | 2 | 0,14 € | 0,27 € | 640 |
| Plate 1 x 8 | 3 | 0,09 € | 0,27 € | 1615 |
| Brick 1 x 4 | 4 | 0,07 € | 0,26 € | 1197 |
| Plate 1 x 12 | 2 | 0,13 € | 0,26 € | 612 |
| Technic, Liftarm Thick 1 x 15 | 1 | 0,26 € | 0,26 € | 100 |
| Technic, Axle Connector 3L | 2 | 0,13 € | 0,25 € | 0 |
| Brick 1 x 8 | 2 | 0,13 € | 0,25 € | 647 |
| Tile 2 x 6 | 1 | 0,25 € | 0,25 € | 192 |
| Brick 1 x 6 | 5 | 0,05 € | 0,25 € | 464 |
| Brick 1 x 10 | 2 | 0,12 € | 0,25 € | 141 |
| Brick 1 x 2 | 11 | 0,02 € | 0,24 € | 858 |
| Plate, Modified 1 x 2 with Pin Hole on Top | 2 | 0,12 € | 0,24 € | 9 |
| Brick 1 x 2 x 2 with Inside Stud Holder | 4 | 0,06 € | 0,24 € | 236 |
| Plate, Round 1 x 1 | 14 | 0,02 € | 0,24 € | 444 |
| Brick 1 x 6 | 2 | 0,12 € | 0,23 € | 530 |
| Bar 2L with Stop Ring | 2 | 0,12 € | 0,23 € | 43 |
| Bar 2L with Stop Ring | 3 | 0,08 € | 0,23 € | 20 |
| Plate, Modified 1 x 4 with Tow Ball | 2 | 0,11 € | 0,23 € | 128 |
| Brick, Round 1 x 1 | 3 | 0,08 € | 0,23 € | 49 |
| Brick, Modified 1 x 1 with Studs on 2 Sides, Opposite | 4 | 0,06 € | 0,22 € | 127 |
| Technic, Liftarm, Modified L-Shape Quarter Ellipse Thin 3 x 3 | 2 | 0,11 € | 0,22 € | 43 |
| Brick 2 x 8 | 2 | 0,11 € | 0,22 € | 188 |
| Tile 2 x 4 | 2 | 0,11 € | 0,21 € | 268 |
| Plate, Modified 1 x 2 with Clip on Side (Horizontal Grip) | 8 | 0,03 € | 0,21 € | 276 |
| Tile 1 x 8 | 2 | 0,10 € | 0,21 € | 300 |
| Technic, Pin 3L without Friction Ridges | 10 | 0,02 € | 0,21 € | 459 |
| Brick, Modified 1 x 4 with Studs on Side | 3 | 0,07 € | 0,20 € | 638 |
| Slope, Inverted 33 3 x 1 | 7 | 0,03 € | 0,20 € | 124 |
| Brick 2 x 2 | 5 | 0,04 € | 0,20 € | 566 |
| Brick 1 x 1 x 3 | 2 | 0,10 € | 0,20 € | 2 |
| Tile, Round Corner 2 x 2 Macaroni | 2 | 0,10 € | 0,19 € | 52 |
| Tile 1 x 4 | 3 | 0,06 € | 0,19 € | 109 |
| Plate 4 x 4 | 2 | 0,10 € | 0,19 € | 610 |
| Tile, Round 1 x 1 Quarter | 7 | 0,03 € | 0,19 € | 345 |
| Technic, Brick 1 x 2 with Hole | 8 | 0,02 € | 0,19 € | 320 |
| Technic, Axle Connector Perpendicular 2 x 5 Bent | 1 | 0,18 € | 0,18 € | 87 |
| Plate 1 x 3 | 4 | 0,05 € | 0,18 € | 602 |
| Plate, Round 4 x 4 with Hole | 3 | 0,06 € | 0,18 € | 434 |
| Ladder 1 1/2 x 2 x 2 | 2 | 0,09 € | 0,18 € | 143 |
| Plate 1 x 10 | 2 | 0,09 € | 0,18 € | 700 |
| Plate 1 x 2 | 2 | 0,09 € | 0,18 € | 20 |
| Brick 1 x 10 | 1 | 0,18 € | 0,18 € | 79 |
| Plate 2 x 3 | 4 | 0,04 € | 0,18 € | 1691 |
| Technic, Axle Connector Double - Flexible Rubber | 2 | 0,09 € | 0,18 € | 256 |
| Slope 18 4 x 2 | 2 | 0,09 € | 0,18 € | 207 |
| Plate, Round Corner 6 x 6 | 2 | 0,09 € | 0,17 € | 52 |
| Brick, Round Corner 4 x 4 Macaroni with 3 Studs | 2 | 0,09 € | 0,17 € | 138 |
| Tile 1 x 1 | 4 | 0,04 € | 0,17 € | 96 |
| Brick 1 x 2 | 4 | 0,04 € | 0,17 € | 2005 |
| Technic, Pin without Friction Ridges | 6 | 0,03 € | 0,17 € | 56 |
| Technic, Brick 1 x 1 with Hole | 6 | 0,03 € | 0,17 € | 203 |
| Brick 1 x 3 | 3 | 0,05 € | 0,16 € | 612 |
| Technic, Pin with Short Friction Ridges | 13 | 0,01 € | 0,16 € | 2390 |
| Brick 1 x 1 x 5 - Solid Stud | 4 | 0,04 € | 0,16 € | 229 |
| Plate 2 x 2 | 4 | 0,04 € | 0,16 € | 98 |
| Arch 1 x 3 x 2 Inverted | 2 | 0,08 € | 0,16 € | 89 |
| Plate 1 x 2 | 5 | 0,03 € | 0,16 € | 231 |
| Plate 1 x 1 | 5 | 0,03 € | 0,15 € | 156 |
| Slope, Curved 3 x 1 | 4 | 0,04 € | 0,15 € | 48 |
| Plate 1 x 1 | 3 | 0,05 € | 0,15 € | 1775 |
| Technic, Brick 1 x 10 with Holes | 1 | 0,14 € | 0,14 € | 532 |
| Technic, Axle 5L with Stop | 5 | 0,03 € | 0,14 € | 245 |
| Tile 1 x 2 | 4 | 0,03 € | 0,13 € | 236 |
| Technic, Axle and Pin Connector Perpendicular 3L with Center Pin Hole | 1 | 0,13 € | 0,13 € | 32 |
| Technic, Liftarm Thick 1 x 3 | 1 | 0,13 € | 0,13 € | 3 |
| Tile, Round 1 x 1 with Bar and Small Pin Hole | 4 | 0,03 € | 0,13 € | 570 |
| Slope, Curved 1 x 4 x 2/3 Double | 1 | 0,13 € | 0,13 € | 22 |
| Slope, Inverted 45 2 x 1 | 4 | 0,03 € | 0,12 € | 728 |
| Plate, Modified 2 x 8 with Door Rail | 2 | 0,06 € | 0,12 € | 182 |
| Technic, Axle and Pin Connector Angled #4 - 135 degrees | 2 | 0,06 € | 0,12 € | 70 |
| Brick 2 x 4 | 2 | 0,06 € | 0,11 € | 614 |
| Plate 1 x 2 | 4 | 0,03 € | 0,11 € | 160 |
| Brick 2 x 4 | 2 | 0,06 € | 0,11 € | 136 |
| Brick, Round 1 x 2 with Hollow Studs and Open Center with Bars | 2 | 0,06 € | 0,11 € | 1 |
| Plate, Modified 1 x 4 with 2 Studs with Groove | 3 | 0,04 € | 0,11 € | 229 |
| Plate 2 x 4 | 4 | 0,03 € | 0,11 € | 284 |
| Plate 1 x 6 | 2 | 0,05 € | 0,11 € | 1430 |
| Brick 1 x 1 | 5 | 0,02 € | 0,11 € | 710 |
| Arch 1 x 4 | 3 | 0,03 € | 0,10 € | 95 |
| Brick 1 x 1 | 2 | 0,05 € | 0,10 € | 1657 |
| Brick, Round 2 x 2 with Axle Hole | 2 | 0,05 € | 0,10 € | 704 |
| Plate 2 x 3 | 3 | 0,03 € | 0,10 € | 1651 |
| Brick 1 x 2 | 3 | 0,03 € | 0,10 € | 1640 |
| Plate, Modified 1 x 8 with Door Rail | 1 | 0,10 € | 0,10 € | 200 |
| Technic, Pin 3L without Friction Ridges with Stop | 1 | 0,10 € | 0,10 € | 40 |
| Tile 1 x 4 | 2 | 0,05 € | 0,10 € | 678 |
| Tile, Round 1 x 1 | 3 | 0,03 € | 0,10 € | 224 |
| Technic, Axle and Pin Connector Perpendicular 3L with 2 Pin Holes | 2 | 0,05 € | 0,10 € | 398 |
| Tile, Round 1 x 1 Quarter | 3 | 0,03 € | 0,09 € | 162 |
| Technic, Plate 2 x 8 with 7 Holes | 1 | 0,09 € | 0,09 € | 244 |
| Tile 2 x 2 | 2 | 0,05 € | 0,09 € | 587 |
| Technic, Liftarm Thick 1 x 5 | 2 | 0,05 € | 0,09 € | 545 |
| Cone 4 x 4 x 2 with Axle Hole | 1 | 0,09 € | 0,09 € | 140 |
| Technic, Axle 3L | 4 | 0,02 € | 0,09 € | 166 |
| Slope, Inverted 33 3 x 1 | 3 | 0,03 € | 0,09 € | 0 |
| Technic, Axle 4L | 3 | 0,03 € | 0,09 € | 154 |
| Tile, Round 2 x 2 with Hole | 1 | 0,09 € | 0,09 € | 293 |
| Technic, Liftarm Thick 1 x 1 (Spacer) | 2 | 0,04 € | 0,09 € | 335 |
| Brick 1 x 2 | 1 | 0,09 € | 0,09 € | 1200 |
| Brick 2 x 2 | 2 | 0,04 € | 0,08 € | 1126 |
| Plate 1 x 10 | 1 | 0,08 € | 0,08 € | 1195 |
| Plate, Modified 1 x 3 with 2 Open O Clips on Top | 1 | 0,08 € | 0,08 € | 25 |
| Plate 2 x 2 Corner | 2 | 0,04 € | 0,08 € | 878 |
| Brick 1 x 8 | 1 | 0,08 € | 0,08 € | 226 |
| Technic, Axle 1L with Pin with Friction Ridges | 6 | 0,01 € | 0,08 € | 1509 |
| Brick, Modified 1 x 1 x 2/3 with Open Stud | 1 | 0,08 € | 0,08 € | 12 |
| Technic, Axle 9L | 1 | 0,08 € | 0,08 € | 76 |
| Plate 1 x 1 | 3 | 0,02 € | 0,07 € | 755 |
| Slope, Curved 2 x 2 x 2/3 with 2 Studs and Curved Sides | 4 | 0,02 € | 0,07 € | 97 |
| Brick 1 x 4 | 2 | 0,04 € | 0,07 € | 621 |
| Slope 33 3 x 1 | 3 | 0,02 € | 0,07 € | 188 |
| Brick 2 x 6 | 1 | 0,07 € | 0,07 € | 215 |
| Technic, Brick 1 x 6 with Holes | 1 | 0,07 € | 0,07 € | 164 |
| Plate 1 x 6 | 2 | 0,04 € | 0,07 € | 527 |
| Brick and Axle Separator | 1 | 0,07 € | 0,07 € | 146 |
| Plate 1 x 3 | 2 | 0,04 € | 0,07 € | 792 |
| Plate 1 x 1 | 2 | 0,03 € | 0,07 € | 1601 |
| Plate, Modified 1 x 2 with Pin Hole on Top | 3 | 0,02 € | 0,07 € | 178 |
| Technic, Liftarm, Modified Bent Thick L-Shape 3 x 5 | 1 | 0,07 € | 0,07 € | 66 |
| Brick 1 x 1 | 2 | 0,03 € | 0,07 € | 1500 |
| Technic, Pin Connector Round 2L with Slot (Pin Joiner Round) | 1 | 0,07 € | 0,07 € | 736 |
| Plate 1 x 10 | 1 | 0,06 € | 0,06 € | 346 |
| Plate 1 x 2 | 3 | 0,02 € | 0,06 € | 1028 |
| Technic, Liftarm Thick 1 x 2 - Axle Hole | 2 | 0,03 € | 0,06 € | 300 |
| Brick 2 x 2 Corner | 1 | 0,06 € | 0,06 € | 704 |
| Plate 2 x 2 | 2 | 0,03 € | 0,06 € | 2488 |
| Brick, Modified 1 x 1 x 1 2/3 with Studs on Side | 1 | 0,06 € | 0,06 € | 145 |
| Slope, Inverted 45 2 x 2 with Hollow Round Bottom Tube | 1 | 0,06 € | 0,06 € | 58 |
| Technic, Brick 1 x 4 with Holes | 1 | 0,06 € | 0,06 € | 520 |
| Technic, Axle and Pin Connector Perpendicular 3L with 2 Pin Holes | 2 | 0,03 € | 0,06 € | 218 |
| Brick 1 x 1 x 3 | 1 | 0,06 € | 0,06 € | 66 |
| Brick 2 x 4 | 1 | 0,05 € | 0,05 € | 430 |
| Plate 1 x 2 | 2 | 0,03 € | 0,05 € | 1111 |
| Brick, Modified 2 x 2 with Channels and Axle Hole | 1 | 0,05 € | 0,05 € | 250 |
| Plate, Round 1 x 1 | 3 | 0,02 € | 0,05 € | 537 |
| Plate, Round 4 x 4 with Hole | 1 | 0,05 € | 0,05 € | 248 |
| Plate 1 x 3 | 1 | 0,05 € | 0,05 € | 1360 |
| Brick 1 x 3 | 1 | 0,05 € | 0,05 € | 953 |
| Brick, Modified 2 x 2 with Pin and Axle Hole | 2 | 0,02 € | 0,05 € | 85 |
| Technic, Axle 5L | 2 | 0,02 € | 0,04 € | 132 |
| Tile, Modified 1 x 2 Grille with Bottom Groove | 2 | 0,02 € | 0,04 € | 306 |
| Plate 1 x 3 | 1 | 0,04 € | 0,04 € | 674 |
| Tile, Round 2 x 2 with Bottom Stud Holder | 1 | 0,04 € | 0,04 € | 38 |
| Tile, Round 2 x 2 with Hole | 1 | 0,04 € | 0,04 € | 127 |
| Technic, Axle 5.5L with Stop | 2 | 0,02 € | 0,04 € | 434 |
| Tile, Round 2 x 4 Oval | 1 | 0,04 € | 0,04 € | 3 |
| Technic, Brick 1 x 2 with Holes | 1 | 0,04 € | 0,04 € | 274 |
| Technic Bush | 2 | 0,02 € | 0,04 € | 846 |
| Plate, Modified 1 x 2 with Pin Hole on Top | 1 | 0,04 € | 0,04 € | 290 |
| Technic, Pin 3L with Friction Ridges and Stop Bush | 1 | 0,04 € | 0,04 € | 66 |
| Technic, Axle 8L with Stop | 1 | 0,03 € | 0,03 € | 485 |
| Technic Bush 1/2 Smooth | 2 | 0,02 € | 0,03 € | 427 |
| Technic Bush | 2 | 0,02 € | 0,03 € | 360 |
| Plate 2 x 4 | 1 | 0,03 € | 0,03 € | 876 |
| Plate 2 x 3 | 1 | 0,03 € | 0,03 € | 717 |
| Technic, Brick 1 x 2 with Axle Hole | 1 | 0,03 € | 0,03 € | 639 |
| Slope 45 2 x 1 | 1 | 0,03 € | 0,03 € | 802 |
| Plate 1 x 4 | 1 | 0,03 € | 0,03 € | 734 |
| Technic, Brick 1 x 2 with Hole | 1 | 0,03 € | 0,03 € | 1099 |
| Plate, Round 2 x 2 with Axle Hole | 1 | 0,03 € | 0,03 € | 520 |
| Technic, Brick 1 x 2 with Hole | 1 | 0,03 € | 0,03 € | 665 |
| Plate 2 x 2 | 1 | 0,03 € | 0,03 € | 1004 |
| Technic, Axle Connector 2L (Smooth with x Hole + Orientation) | 1 | 0,02 € | 0,02 € | 195 |
| Slope, Inverted 45 2 x 1 | 1 | 0,02 € | 0,02 € | 303 |
| Slope 45 2 x 1 | 1 | 0,02 € | 0,02 € | 270 |